In order to understand how EV settings work, you must first be familiar with the concept of f-stop, and shutter speed settings.
Briefly the smaller the f-stop number, the larger is the aperture size it represents. Each aperture setting is either half or twice the size of its neighbour (so f/8 - for example - is half the size of f/5.6, and f/5.6 is twice the size of f/8).
Similarly, shutter speed steps are also either half or twice as fast as its neighbour (so 1/30th - for example - is twice as long as 1/60th, and 1/60th is half as long as 1/30th).
Thusly, a number of different combinations of aperture size and shutter speed all produce the same degree of exposure. For example, f/5.6 at 1/60th provides the same level of light exposure as f/8 at 1/30th (where the amount of light halves, and the duration of exposure doubles).
Of course, there are even more permutations; f/8 at 1/30th is also the same as f/11 at 1/15th (half the light for twice as long), or f/4 at 1/125th (four times the light for a quarter of the time), and f/2.8 at 1/250th (eight times the light for an eighth of the time) etc.
A one step change, to either setting, is known as a "one stop" change.
To simplify the process of setting alternative aperture and shutter speed combinations, a German camera shutter manufacturer - called Friedrich Deckel - first developed the Exposure Value (EV) concept in the 1950s. The likely impetus for this was the rise in popularity of colour film, which required greater exposure accuracy than black and white film photography (modern 35mm colour film started to become available in the mid 1930s).
In 1954, numerous camera (and shutter) manufacturers adopted Deckel's Exposure Value Scale (EVS); including Hasselblad, Kodak, Konica, Olympus, Ricoh, Seikosha and VoigtlÃ¤nder, to name but a few.
They introduced lenses with coupled shutters and, and EV scales, such that, after setting the exposure value, adjusting either the shutter speed or aperture made a corresponding adjustment in the other to maintain a constant exposure.
When camera models with built-in light meters started to emerge, some also metered against an EV scale (as opposed to an aperture or shutter speed scale), and correct exposure was accomplished by transferring the meter's EV reading to the lens, though adjustment of lens apertures and/or shutter speed settings.
The Exposure Value (EV) is therefore a numerical scale that represents a combination of a camera's shutter speeds and f-numbers, such that all combinations yield that the same exposure have the same EV value.
More than that, Exposure Value scale steps also align with intervals on the photographic exposure scale. In other words, an increment of one step on the EV scale represents a one step (often referred to as a stop) increase in exposure, and conversely a one step decrease corresponds to a one step reduction in exposure. For this reason, some cameras had, and still have, exposure compensation features that are graded as EV steps (e.g. +/- 2 EV).
For example, if EV 9 corresponds to f/4 and 1/30th of a second, EV 8 is f/4 at 1/15th of a second, and EV 10 is f/4 at 1/60th of a second (plus any other combination of settings that produce the EV scale value).
The EV scale starts at 0, which represents a 1 second exposure at f/1.0. Lenses with an aperture that big are rare, but it's the same as a 2 second exposure at f/1.4, or a 4 second exposure at f/2, etc.
EV 15 equates to full sunlight with distinct shadows, while EV -4 would be a scene lit by a full moon. An EV is therefore a convenient "system" for describing the quality of light.
The EV scale can thus be used as a rough guide to exposure setting in the absence of a light meter. So EV 14 is hazy sunlight with soft shadows, EV 13 is cloudy bright with no shadows, 12 is overcast, and so on (for a 100 ISO film).
While the EV scale is still in use today (and has some merits in describing lighting conditions), it fell from favour as a means of setting a camera exposure towards the end of the 1960s, when meter coupling became more common, and removed the need to manually transfer a meter reading to lens settings, or even set anything at all (with the camera doing this automatically). In effect, the importance of correct colour exposure had been automated, leaving the way clear for casual photographers to concentrate on other aspects of the craft.
While the EV was (and still is) a simple method of expressing two variable settings (aperture and shutter speed) as a single number, the problem with this generalisation is that it ignores some fundamental principles of photography. These are: the f-number determines the depth of field, and the shutter speed determines the amount of motion blur.
About the Author:
My 35mm Film Camera Collection