Protect Investment With DIY Hearing Aid Cleaning & Repair Tips
Protect Investment With DIY Hearing Aid Cleaning & Repair Tips
Hearing aids are small and expensive but with just a few DIY hearing aid cleaning and repair tips, the owner can keep them in top working condition. However, since these units are small and contain complicated electronic circuitry, except for general cleaning and changing the battery, there are few individuals who should attempt to take them apart anf effect repairs. The insure long-lasting use from the hearing aids, the owner can perform DIY hearing aid cleaning and repair jobs given to qualified professionals.
There are three main threats to hearing aids, regardless of the type or the number of features they contain. Children, pets and earwax can prevent the hearing aid from functioning properly. Children may not understand the sensitivity of this type of equipment and small children could accidentally swallow the battery or, if the unit is small enough, the entire piece. When performing DIY hearing aid cleaning and repair jobs, keep them out of the reach of children.
Dogs, cats and other pets can quickly turn an expensive hearing aid in a useless lump of plastic and the devices should always be protected from them. It is the third danger, earwax that DIY hearing aid cleaning and repair protect the investment.
No Owner Serviceable Part Inside
Most people would never consider opening their home electronics devices due to lack of knowledge on how to repair them. This same thought process should apply to hearing aids as well. The only piece that should be touched by a hearing aid user is the battery. The most beneficial DIY hearing aid cleaning and repair steps is preventative maintenance. By insuring the hearing aid is kept clean and free of waxy build up the sounds though the microphone will be clear and the sounds coming out will be understandable.
For behind the ear hearing aids, the only thing to clean is the ear mold. Since it is removable from the unit, and has no parts inside, it can be cleaned by placing it in a cup of water with detergent for a few minutes and then rinsed. After allowing it to air dry, if any water remains inside the tube, it can be removed by blowing through it. The steps for DIY hearing aid cleaning and repair for other types are simply using a soft brush to remove any wax that may appear on the unit. Visibly inspecting the hearing aid when they come out at night, and wiping them with a soft cloth will help keep them clean and functioning. If repairs are needed, they should be taken to a qualified hearing aid shop.