Choosing The Right Home Security Alarm System
Choosing The Right Home Security Alarm System
Installing a home security alarm system can be a weekend do-it-yourself project with just a little knowledge of hand tools and the right system. The first step is determining the type of system you want to install, and that can be determined by what function you expect the home security alarm system to perform.
For most homeowners, the most important thing that a home security alarm system can do is prevent someone from unlawfully entering the home, whether they are home or not. A few will focus on catching the bad guys trying to break in, but for the most part they do not want the situation to get that far. Silent alarms that notify the local authorities are great for catching criminals, but they can also give the intruder a false sense of security in believing any alarm is not activated.
When a burglar walks around the house, and you are waiting for the police to arrive there is always the potential for a dangerous confrontation. This is why many people want their home security alarm system to sound an extremely lour siren the moment the alarm is activated. Typically, the siren will send the intruder back out they way they came, leaving the homeowner safe and secure, while calming themselves down from the potential of harm.
Figure Out What Needs To Be Protected
To determine the extent of the home security alarm system needed, first walk the exterior perimeter of your home and look for points of entry. Beyond the obvious doors and windows, consider basement windows and crawl spaces as well as external basement doors. While a determined burglar will get into the house regardless of its security measures, scaring off the occasional thief is the goal.
When wiring a home security alarm system make sure the wires are hidden and not accessible from any point outside the home. Since many of the systems use a dialer system to notify authorities of an alarm's activation, making the sure the phone lines cannot be cut from outside is an important step. The alarm will do no good if it is unable to get a dial tone when activated.
A perimeter home security alarm system is the first thing to consider, but it also has the potential to leave holes in the loop if one of the devices failed. Infrared motion detectors can be used to cover a wide area inside the home, but they have the potential of false alarms if the family pet walks through the room at night. Consider all the possibilities for false alarms when designing a home security alarm system, and call in an expert if you have too much trouble deciding on needed devices.