Learning How To Build A Pond Can be Back-Breaking Work
If you are planning to add a water hole to your landscaping and have no idea what you are doing, it will probably pay to have someone who knows how to build a pond work on the installation. Additionally, unless you are using a pre-formed pond kit, digging and installing electric and plumbing needs can be back-breaking work and unless you understand how to build a pond can all be for nothing if it is not done right.
There is more to adding a pond to the landscaping than digging a hole and let it fill with water. In most landscaping circles that is a water hole, which will soon turn into a mud hole and later a haven for insects and a breeding ground for insects. Having someone who knows how to build a pond either do the work or at least offer experienced instruction can make the job easier and the final product more beneficial to your needs.
The step in how to build a pond involves drawing what you want, including the size and depth as well as provisions for adding waterfalls, fountains and any other accoutrements you may wish to install. If you have to run electric power or plumbing for adding water or for drainage, these will all need to be part of the overall plan.
Getting Down To Business Of Construction
Once you have a detailed plan of how to build a pond, you can dig the hole into which the pond will be constructed, usually about six to eight-inches deeper than on the plans. This allows space for sand and gravel to be placed on the bottom before rolling out the rubber or plastic liner that will hold the water in the pond.
You will need to make allowances for any connections by trimming holes, and sealing around them for electrical conduit and water pipes. If you have planned properly and performed all the pre-work before adding water you can learn how to build a pond without using trial and error and more labor than necessary.
Before adding water, anyone that knows how to build a pond understands that stands for pumps and fountains and other items to be installed have to be in place. It saves you from walking around in the water as well as handling electrical connections while being wet, which is never a good thing. When everything is in, you can add water and once it has settled, in about three or four days, you can add fish or other aquatic life.
