Replacement Casement Window Weather-stripping
Most window problems can be repaired and this includes replacement casement window weather-stripping. Some replacement casement window weather-stripping requires a professional touch in order to achieve the best results for your window replacement. However, in other cases one can repair and replace a window on their own with a little knowledge and advice. This definitely is worth looking into when replacement casement window weather-stripping is needed.
The casement, double hung, awning, sliding and stationary windows are the most common types. A casement contains hinges on one side so it can allow the window to swing out. A double-hung window is crafted so the lower portion o f the window opens in front of the upper portion.
An awning window is hinged closely to the top of the window and swings out at the bottom so it can be opened even when it rains. Similar to an awning window is a louvered window and its difference is it has more panes and hinges. A sliding window slides from side to side on metal or plastic rollers that sit in channels along the top and bottom of the window frame. A stationary window does not open.
One common problem with windows is sticking casements and broken glass. Casement window mechanisms get dirty and sometimes break. Older windows often let in too much air from outside and require replacement casement window weather -stripping. This is often the problem with skylights.
Cleaning and lubricating may be all a window needs if it is sticking. If a casement window or skylight opening mechanism does not work easily it will likely need to be replaced. Apply weather - stripping if a window lets in drafts.
Replacement Casement Window Weather - Stripping Fix-it
Before applying self-stick weather-stripping wash, rinse, and dry the surfaces to which it will be applied because weather-stripping requires a clean surface for it to adhere.
Cut a length of weather-stripping equal to the width of the window sash and remove the backing. Apply the weather-stripping to the bottom of the lower sash and cut two lengths of weather-strip an inch longer than the height of the lower sash.
Apply those strips to the lower half of the interior side channels in the window frame and drop the sash halfway so its bottom rail is exposed. Apply weather-stripping to the inside edge of the window's bottom rail and lower both sashes.
Apply weather-strip to the top of the sash, cut two lengths of weather-stripping an inch longer than the height of the upper sash. Finally apply the strips to the upper half of the exterior side channels in the frame. Additionally consult the manufacturer's instructions every step of the way.
