Learn How to Configure Routers into Networks
Learning how to configure routers into networks is not as complicated as it sounds. What it simply means is setting up your router with your existing computer system. You need a lot of space to when you are trying to configure routers into networks. This will let you see what you are doing and lay out everything you need.
Think of it as any DIY project that you might have going. In such a case you would want to follow all the steps carefully. To do this read everything you need to know before trying to configure routers to networks so that you don't miss out anything important or need to go back a step or two and undo mistakes.
Getting Started
The first step in learning how to configure routers to networks is very simple. Just plug your router into a power outlet and turn it on. Now connect your modem to the router. You can use an Ethernet cable or you can use a USB cable.
There is a port on your router that is labeled "WAN", "uplink" or simply Internet. Once your modem is connected to the router turn the modem off and then switch it back on again. This will ensure that the router recognizes the modem.
Now you need to connect your main computer to the router via a cable. This step must be done even if you are learning to configure wireless routers to networks. After installation you can switch your computer over to wireless mode with no problems. Open a Web browser and enter your router's address. This should be in your router's instruction manual.
Your manual should also provide a username and password. This needs to be entered. After installation you should change the password. Now enter your Internet connection information such as IP address or PPoE username and password into the related part of the router's configuration.
You need to change the network name of your router if it is a wireless router. Check that your computer has received IP address information from the router. Try to surf the Internet and see that you are connected to the Internet.
You have now learned how to configure wireless routers to networks. It is quite easy once you follow all the steps. The manual should also have some helpful advice and steps to put you along the right direction. If all else fails talk to the people at your local computer store.
